Vagcom 17.1 full active vcds 17.1 China crack VAG 17.1 For VW Audi Seat Skoda ,V17.1 VAG Diagnose Cable support all systems diagnostics including K1,K2,CAN,UDS. full active vcds 17.1 with ATMEGA162 + FT232RL + L9637D + 16V8B.

---

Vagcom 17.1 full active VCDS 17.1 China crack VAG 17.1 For VW Audi Seat Skoda Stable as chair

 

VAG COM VCDS 17.1 highlight:

Software Version: VCDS 17.1  
Firmware Version: 1.96  
Supported Vehicle List: For AUDI VW SEAT SKODA
Chip Edition: ATMEGA162 + FT232RL + L9637D + 16V8B
System requirement: Windows XP, Vista, 7, 8 and 10(32-bit and 64-bit)
(It does not support Windows 95, 98, ME, and NT4 operating system)
High quality original brand new IC production, With the upgrade brush program interface
After installation has been activated to support all systems diagnostics (including K1,K2,CAN,UDS)

 

VAG 17.1.0 software download link:

 

https://mega.nz/folder/CN52hDrQ#y_W37lnWC-wruNI3veNNQg

Vagcom 20.4.2 HEX CAN USB Interface online update version 16 multilanguage ( Support 16 languages, including of Chinese, English, French, German, Russian, Italian, Swedish, Danish, Czech, polish, Dutch, Hungarian, Portuguese, Spanish, Slovenia, Romania.) Model: OBD648

VAG COM 17.1 New added functions:

 

-Support for MLB2 platform cars (HEX-NET interface recommended)
-Support for 2016 and early model cars
-Greatly expanded the amount of DTC Freeze-Frame data dsiplayed
-Improvements in Advanced Measuring Value Selection Window
-Display of factory identifiers instead of arbitrary location numbers
-Support for Six-Digit security access codes
-HEX-NET Turbo and other speed optimizations
-Optimized low-level timing routines and CPU core affinity
-Major firmware enhancements for HEX+CAN and Micro-CAN interfaces
-Improved UDS mapping speed and reliability when subchannels are present; progress indicators.
-Fixes SRI reset in newer Crafter instruments.
-New ASAM data and Label Files
-Support vehicle list: For AUDI VW SEAT SKODA

 

AUDI VW SEAT SKODA MY2018+ and MQB plaftform cars recommend this item

DIY VAG COM 20.4.2 HEX V2 Interface MQB HEX V2 unlimited VIN Diagnostic Cable for VW Audi Seat Skoda

 

Vagcom 17.1 Basic functions

 

00 Auto Scan
01 control module unit information
02 read fault codes
03 Output Test
       Selective output test (only for KWP-2000 *)
04 Basic settings
05 clear DTCs
06 Close Control Module
07 pairs of coding control module
       Slave control module for coding (only for KWP-2000 *)
Read measured value block 08
09-channel read (applies only to KWP-1281 *)
10 matching
11 Log (known under KWP-2000 * Coding II)
15 View Ready
16 security access (only for KWP-2000 *)
18 All supported fault codes (only for KWP-2000 *)
33 Common OBD-II function

VCDS 17.1 New Features:

 

Auto Scan 1001.01
1. Control module unit information
2. Read fault codes 004.01
3. Output test 005
   Selective output test 005
4. Basic settings 006
5. Clear DTCs 004.10
6. Close control module 022
7. Pairs of coding control module (brush hidden) 007 (service 1A)
   008 (Service 22) From the station control module 007 coding (service 1A)
   008 (Service 22) Read measured value block 08 010.02 (KWP1281)
8. Advanced measurement reading
9. channel read 010.01
10. matching 012 014 (long)
11. Log (Known under KWP-2000 * Coding II) 015.01
12. View readiness 020.01 Guided ready state settings
13. security access 015.02
14. All supported DTCs
15. Common OBD-II function
16. Fault environmental data
17. Dual K-Line Support 7-PIN code 020.07
18. Upgrade to the latest fault code library
19. Direct CAN line diagnosis (Need to support diagnostic cables CAN line diagnosis)
20. Modes of transport 1001.03 (on)
    1001.04 (off) (Need to support diagnostic cables CAN line diagnosis)
21. Advanced measurement block
22. Support for dual engine control module

 

Compared to the previous version, the VAG 17.1 main changes is BUG fixes and improvements.

Vagcom 17.1 Using Guide:

 

Downloaded VCDS software installation file, follow the steps to install the software correctly VCDS,You must VCDS software installed on your computer's hard drive!
If you run directly from other media VCDS software, the software may not run correctly
You can use a CD or USB flash drive to copy files to install VCDS on your computer hard drive you want to install, and then install it.

The appropriate diagnostic cable to connect the computer to the vehicle and turn the ignition switch of the vehicle, but it is not necessary to start the engine.

Click the [System Configuration], and then select the correct communications port
Click [Test] to confirm VCDS program can use the correct communications port, find diagnostic cables
Then click [Save]

You can now use all the features of the program VCDS. Ensure VCDS software can reliably access all the control modules that you have a vehicle to view the fault code. See the VCDS diagnostic system for vehicle applications list

VCDS 17.1 Note:

1. Version 17.1 must be used to Ross-Tech's HEX-, KEY-, KII-, or Micro-CAN series of "smart" diagnostic cables
2. You can not be used elsewhere to buy or produce their own diagnostic cable
3. VCDS Chinese program is installed by default in the following directory: C: Ross-Tech VCDS-ZHS
4. If you are using more than 7 operating system Windows Vista or Windows, please do not install the VCDS in the system Program Files directory

VAG 17.1 NOTEs：

 

VAG 17.1 interface not be found:
When you install software,please not run software first!!
Connect VAG cable to the PC,then run your software!!

why come this issue?
Atmel chip need read your software and Calculate the code

VCDS 17.1 Packing List:

 

1 pcs x Vagcom 17.1 diagnostic cable
1 pcs x CD with VAG 17.1 software
 

VCDS 17.1 FAQ:

Q: PC internect connection?
A: yes,but not suggest.

Q: run RT software directly?
A: no,run modified software from us,working perfectly same to RT software.

Q: VCDS 17.1 is long coding full functions?
A: yes.full functions.

Q: change PC time?
A: no need.

Q: what is VAG 17.1 inside main chips ?
A: Chip Edition: ATMEGA162 + FT232RL + L9637D + 16V8B

Q: VCDS 17.1 can support all systems ?
A: yes, including K1,K2,CAN,UDS

---

OBD2cartool After-Sale Service:

 

Technical Support: Free

 

Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Yahoo: obd2cartool@yahoo.com
Skype: great2obd
If you have any problem, please do not hesitate to contact us.

 

Wholesaler Discount: If you are wholesaler or reseller, pls send email to obd2cartool@hotmail.com, we will give you best discount for long-term cooperate.

 

Payment Terms: We accept payment by paypal, western union, money gram and bank transfer.

 

Shipment Note:

 

1. All our free shipping items can track it online after delivery, you don't worry about your order status.
2. Express Delivery we will send to you with DHL,EMS,UPS,FEDEX,TNT..., please give us a valid delivery phone number, and also a full and accurate shipping address.

 

How to make order on OBD2cartool.com?

 

 

Notice: After you place order, pls reply confirm email send by obd2cartool@hotmail.com asap for us to arrange ship for you, thanks