DIY Hex-v2 23.11.0 is the new generation of vag com vcds obd2 diagnostic interface for vag vehicles. DIY MQB platform HEX V2 23.3.1 VAG model year coverage from 1995 – 2023 year. DIY Unlimited VIN HEX V2 VAG COM VCD 23.3 full active cable For VW Audi Seat Skoda MQB A0,it is could online update.
DIY VAG COM 23.11.0 HEX V2 Interface MQB HEX V2 unlimited VIN Diagnostic Cable for VW Audi Seat Skoda
MQB HEX-V2 23.3.0/20.12.0 Intelligent Dual-K & CAN USB Interface Car Auto Fault Diagnosis cable
DIY MQB Hex-v2 23.3 Features:
1. Fully licensed for vag com software, acts as the key to unlock the software, no additional software purchase required.
2. USB connection, compatible with all modern laptops.
3. Compatible with all diagnostic-capable VW/Audi passenger cars from 1996 to current; K, K+L, dual-K, or CAN.
4. Detachable USB cable.
The supplied cable has a proprietary screw locking mechanism, but it can be replaced temporarily with a standard USB-A to USB-B ("printer") cable when it become damaged.
5. Modern 32-bit micro-controller and fully updatable firmware.
6. Tri-Color (red/green) status/activity LEDs with greatly improved visibility from almost any angle.
7. Includes an embedded license for VAG COM and thus acts as a "dongle" for the software, allowing the software to be used and installed on any compatible PC.
Note: This DIY HEX V2 only for the DIYers, If you want original cable pls order from offical website.
EN English 23.11.0 Released
Need working with loader:
ITT Italian 22.3.1 ( Italiano
Cz Czech:20.12.0 ( čeština
DE German 23.3.1 ( Deutsch
ROJ Romanian 23.3.1 ( Română
FRM French 23.3.1 ( Français
NEZ Danish 23.3.1 ( dansk
AER Sweden 23.3.1 ( Sverige
EST Spanish 22.3.1 ( Español
AKP Polish 23.3.1 ( Polskie
RUS Russian: 23.3.0 ( Выпуск
HGJ Hungarian 23.3.1 ( Magyar
PTT Portuguese 22.3.1 ( Português
CN Chinese 23.3.0
How to update the HEX V2 21.9.0 in the future?
Pls check with online sellers for the newer program.
This interface works with all diagnostic-capable VW-Audi Group passenger cars from 1990 through current, except it does NOT fully support the following vehicles:
Routan vans -- All years. These are re-badged Chryslers and don't use VW's diagnostic protocols.
Some 1991-1994 Audi TDI engines with ECUs that communicate at 240bps.
Some non-original cars Or modified car.
Some cars need with dealer account functions or Newer moduls not on the support list.
"Mk.8" chassis cars are not supported at this time.
You may be able to read data from some control modules individually, and we appreciate all feedback, but please do not expect it to work fully.
We recommend at least a 1 GHz dual-core processor with 1 GB of RAM and Windows 7 or newer(Windows 7 through 10, but not RT) with an available USB 2.0 (or higher) port.
Slower computers or Windows 2000, XP, and Vista may work but are not officially supported.
Windows 8. 8.1 or 10 on a machine robust enough to support the respective operating system are also fine.
Windows running inside a Virtual Machine (for example on a Mac) is not supported
DIY HEX V2 Unlimited VIN
If your car is before 2016 year, recommend this items:
ATMEGA VAG HEX-V2 Vag 20.4.1 USB interface VCDS HEX V2 20.12.0 full actived For VW Audi Seat Skoda
MQB HEX V2 Vagcom 22.9 New Features:
Auto Scan 1001.01
1. Control module unit information
2. Read fault codes 004.01
3. Output test 005
Selective output test 005
4. Basic settings 006
5. Clear DTCs 004.10
6. Close control module 022
7. Pairs of coding control module (brush hidden) 007 (service 1A)
008 (Service 22) From the station control module 007 coding (service 1A)
008 (Service 22) Read measured value block 08 010.02 (KWP1281)
8. Advanced measurement reading
9. channel read 010.01
10. matching 012 014 (long)
11. Log (Known under KWP-2000 * Coding II) 015.01
12. View readiness 020.01 Guided ready state settings
13. security access 015.02
14. All supported DTCs
15. Common OBD-II function
16. Fault environmental data
17. Dual K-Line Support 7-PIN code 020.07
18. Upgrade to the latest fault code library
19. Direct CAN line diagnosis (Need to support diagnostic cables CAN line diagnosis)
20. Modes of transport 1001.03 (on)
1001.04 (off) (Need to support diagnostic cables CAN line diagnosis)
21. Advanced measurement block
22. Support for dual engine control module
DIY Hex v2 Vag 19.6 Basic functions
00 Auto Scan
01 control module unit information
02 read fault codes
03 Output Test
Selective output test (only for KWP-2000 *)
04 Basic settings
05 clear DTCs
06 Close Control Module
07 pairs of coding control module
Slave control module for coding (only for KWP-2000 *)
Read measured value block 08
09-channel read (applies only to KWP-1281 *)
11 Log (known under KWP-2000 * Coding II)
15 View Ready
16 security access (only for KWP-2000 *)
18 All supported fault codes (only for KWP-2000 *)
33 Common OBD-II function
MQB HEX-V2 20.4.0 Packing List:
1 x HEX-V2 VAG 23.11.0 diagnostic cable
1 x VCDS 23.11.0/22.3.0 download link (For easy and fast pass customs not suggest with CD, when you get cable, pls ask seller send the download link)
Please contact the online contact below:
OBD2cartool After-Sale Service:
Technical Support: Free
Live Support: Chat with us online
If you have any problem, please do not hesitate to contact us.
Wholesaler Discount: If you are wholesaler or reseller, pls send email to email@example.com, we will give you best discount for long-term cooperate.
Payment Terms: We accept payment by paypal, western union, money gram and bank transfer.
1. All our free shipping items can track it online after delivery, you don't worry about your order status.
2. Express Delivery we will send to you with DHL,EMS,UPS,FEDEX,TNT..., please give us a valid delivery phone number, and also a full and accurate shipping address.
How to make order on OBD2cartool.com?
Notice: After you place order, pls reply confirm email send by firstname.lastname@example.org asap for us to arrange ship for you, thanks