Vagcom 16.8.4 is almost same as old version vagcom 11.11.3 with green pcb board original factory design. Vcds 11.11 update version vcds 16.8.4 support update to different language and version as you demand. Vcds 11.11.3 vagcom 16.8.4 new verison with full chip including L9637D chip.

---

DIY Vagcom 16.8 Cable Vagcom 11.11 update version VCDS 16.8 support change language and version

Note: obd2cartool.com DIY vcds 16.8.4 cable with 16V8B+ 2*L9637D +ATMEGA162 +FT232RL +MCP2515 +A1050 ,compare DIY VCDS 11.11.3, this one add self recovery IC: AES to protect cable(can turn on and off this chip) .If you have dump can program any version and language by yourself, like vag 15.7.X ,vag 16.8.X ... , it is very popular for dealer.（6 color lines work with ISP programmer)

 

Latest crack vagcom 16.8.4 full VCDS 16.8.4 do long coding video: https://mega.nz/#!PEoiVaSC!jVBzFQ-o0Iy8a9xIZnScykgx0TdM1A1B0A9UKLL36q4

 

Original program, with upgrade interface, with L9637D chip, with AES encryption chip ATAES132A (chip automatic operator code, do not need to send and receive activation code)

 

MQB platform cars and MY2018+ cars recommend this item

DIY VAG COM 21.9.0 HEX V2 Interface MQB HEX V2 unlimited VIN Diagnostic Cable for VW Audi Seat Skoda

 

VAG COM 16.8.4 crack cable main changes:

 

Software Version: 16.84  
Firmware Version: 1.96  
Chip Edition: ATMEGA162 + FT232RL + L9637D + 16V8B
System requirement: Windows XP, Vista, 7, 8,  and 10(32-bit and 64-bit)
High quality original brand new IC production, With the upgrade brush program interface
After installation has been activated to support all systems diagnostics (including K1,K2,CAN,UDS)
Original program, with upgrade interface, with L9637D chip, with AES encryption chip ATAES132A (chip automatic operator code, do not need to send and receive activation code)

 

Why highly recommented vagcom vcds 16.8.4 diy cable?

 

1. design of vagcom 16.8.4 is 1:1 same as original factory plan with full chips.
2. Vagcom 16.8.4 can update to different language and version by reprogram.
3. You can get access to Internet when using this product and never be locked.
4. This product can support long coding，fast scanning fuctions.
5. It supports English and Chinese Languages.
6. It supports Firmware update through reprogramming dump.

VCDS 16.8.4 Software support languages:

 

E.g With different dumps You can diy to reprogramming to be these different version as you desire:

Italian 14.10.2
Polish 15.7.4
French 16.8.3
Hungarian 16.8.1
Germany 16.8.2
Russian 16.8.0
Romanian 16.8.3
Spanish 16.8.3

and more others...

 

VCDS 16.8.X New added functions than old version vcds cable:

Support for MLB2 platform cars (HEX-NET interface recommended)
Support for 2016 and early model cars
Greatly expanded the amount of DTC Freeze-Frame data dsiplayed
Improvements in Advanced Measuring Value Selection Window
Display of factory identifiers instead of arbitrary location numbers
Support for Six-Digit security access codes
HEX-NET Turbo and other speed optimizations
Optimized low-level timing routines and CPU core affinity
Major firmware enhancements for HEX+CAN and Micro-CAN interfaces
Improved UDS mapping speed and reliability when subchannels are present; progress indicators.
Fixes SRI reset in newer Crafter instruments.
New ASAM data and Label Files
Support vehicle list: For AUDI VW SEAT SKODA

Vagcom 16.8.X New Features:

Auto Scan 1001.01
1. Control module unit information
2. Read fault codes 004.01
3. Output test 005
   Selective output test 005
4. Basic settings 006
5. Clear DTCs 004.10
6. Close control module 022
7. Pairs of coding control module (brush hidden) 007 (service 1A)
   008 (Service 22) From the station control module 007 coding (service 1A)
   008 (Service 22) Read measured value block 08 010.02 (KWP1281)
8. Advanced measurement reading
9. channel read 010.01
10. matching 012 014 (long)
11. Log (Known under KWP-2000 * Coding II) 015.01
12. View readiness 020.01 Guided ready state settings
13. security access 015.02
14. All supported DTCs
15. Common OBD-II function
16. Fault environmental data
17. Dual K-Line Support 7-PIN code 020.07
18. Upgrade to the latest fault code library
19. Direct CAN line diagnosis (Need to support diagnostic cables CAN line diagnosis)
20. Modes of transport 1001.03 (on)
    1001.04 (off) (Need to support diagnostic cables CAN line diagnosis)
21. Advanced measurement block
22. Support for dual engine control module
 

Compared to the previous version, the  'EU' VAG16.8.1 main changes is BUG fixes and improvements,support Windows10 system

Basic functions
00 Auto Scan
01 control module unit information
02 read fault codes
03 Output Test
       Selective output test (only for KWP-2000 *)
04 Basic settings
05 clear DTCs
06 Close Control Module
07 pairs of coding control module
       Slave control module for coding (only for KWP-2000 *)
Read measured value block 08
09-channel read (applies only to KWP-1281 *)
10 matching
11 Log (known under KWP-2000 * Coding II)
15 View Ready
16 security access (only for KWP-2000 *)
18 All supported fault codes (only for KWP-2000 *)
33 Common OBD-II function

VCDS software program running:

1.Click the [System Configuration], and then select the correct communications port
2.Click [Test] to confirm VCDS program can use the correct communications port, find diagnostic cables
3.Then click [Save]

You can now use all the features of the program VCDS. Ensure VCDS software can reliably access all the control modules that you have a vehicle to view the fault code. See the VCDS diagnostic system for vehicle applications list

DIY VCDS 16.8.X Note:

1. Version 16.8 must be used to Ross-Tech's HEX-, KEY-, KII-, or Micro-CAN series of "smart" diagnostic cables
2. You can not be used elsewhere to buy or produce their own diagnostic cable
3. VCDS Chinese program is installed by default in the following directory: C: Ross-Tech VCDS-ZHS
4. If you are using more than 7 operating system Windows Vista or Windows, please do not install the VCDS in the system Program Files directory

 

NOTEs：

VAG 16.8.4 interface not be found:
When you install software,please not run software first!!
Connect VAG cable to the PC,then run your software!!

why come this issue?
Atmel chip need read your software and Calculate the code

 

DIY VCDS 16.8.4 Packing List:

1 x DIY Vagcom 16.8.4 diagnostic cable
1 x CD with VCDS 16.8.4 software

---

OBD2cartool After-Sale Service:

 

Technical Support: Free

 

Whatsapp:+86-13537734676
Live Support: Chat with us online
Email: obd2cartool@hotmail.com
Yahoo: obd2cartool@yahoo.com
Skype: great2obd
If you have any problem, please do not hesitate to contact us.

 

Wholesaler Discount: If you are wholesaler or reseller, pls send email to obd2cartool@hotmail.com, we will give you best discount for long-term cooperate.

 

Payment Terms: We accept payment by paypal, western union, money gram and bank transfer.

 

Shipment Note:

 

1. All our free shipping items can track it online after delivery, you don't worry about your order status.
2. Express Delivery we will send to you with DHL,EMS,UPS,FEDEX,TNT..., please give us a valid delivery phone number, and also a full and accurate shipping address.

 

How to make order on OBD2cartool.com?

 

 

Notice: After you place order, pls reply confirm email send by obd2cartool@hotmail.com asap for us to arrange ship for you, thanks