1. Home
  2. Device programmer
  3. Universal Programmer
  4. DediProg SF600 SPI Flash High Speed IC Programmer

DediProg SF600 SPI Flash High Speed IC Programmer

Model: UP502
Availability :  In Stock
  • DediProg SF600 SPI Flash High Speed IC Programmer
$439.00
Current Reviews: 0 Add Your Review
QTY :

The SF600 is a high speed "in System Programming" programmer to update the SPI Flash soldered on board (In Circuit Programming) or in the socket adaptor (Off line programming). SF600 programmer is easily controlled by the computer DediProg Software through the USB bus offering friendly interface and powerful features to users.


DediProg SF600 SPI Flash High Speed IC Programmer


SF600 combines the advantages of SF100 with additional improvements: High speed USB and higher SPI performances.


Features :


USB High speed and high SPI performance, support up to 1Gb SPI Flash
In circuit Programming: Program on board SPI Flash
Off line Programming: Program SPI Flash in the socket
Program two Serial Flash memories
Start button feature: Can do Batch function in USB mode
Signal conflict protections
Multi-Programmers Capability through USB
Support 1.8V low voltage IC
Support Windows 2003 and above
Support both 32 and 64 bit OS

 

Hardware :

SF600 is designed with ISP header, through an appropriate connector, users can connect the programmer and drive the SPI signals, supply the memory and control the controller or application status. Please refer to Table 1 for the SF600 2x10 header pin out. DediProg also provides the SF600 ISP Cable which is used to connect the SF600 programmer to the 2X6 2.54mm ISP Pin Header on board, please refer to Table 2 for the SF600 ISP Cable 2x6 pin out.
Table 1: SF600 ISP Header Pin Out (2x10)
1 Vpp CS2 2
3 CS1 Vcc 4
5 MISO/DQ1 Hold/DQ3 6
7 Wp/DQ2 CLK 8
9 GND MOSI/DQ0 10
11 NC Reset/IO3 12
13 NC NC 14
15 NC NC 16
17 NC NC 18
19 GPIO1 GPIO2 20
Table 2: ISP Cable Connector Pin Out (2x6)
1 Vpp CS2 2
3 CS1 Vcc 4
5 MISO/DQ1 Hold/DQ3 6
7 Wp/DQ2 CLK 8
9 GND MOSI/DQ0 10
11 NC Reset 1

 

Contents :


1 x SF600 Programmer
1 x USB Cable
1 x ISP Cable (ISP-600-CB1-G)
1 x SF100 2.54mm 2*4 ISP Cable (ISP1-CB)
1 x SF600 Universal Adaptor (ADP-SF600-TO-SF100)
1 x CD-ROM (Included Software, specifications and user manual)

 

Customers also purchased